Cooler Master SickleFlow 92mm Case Fan PWM Non-LED Black
MFX-B9NN-23NPK-R1 · 0.12 A · 98 gAvailable on backorder
DescriptionThe Cooler Master SickleFlow 92 PWM Non-LED Black is a 92 mm case fan…
The Cooler Master SickleFlow 92 PWM Non-LED Black is a 92 mm case fan for builds that need quiet, controllable airflow rather than lighted effects. Its 4-pin PWM connector lets the motherboard vary speed between roughly 650 and 2300 RPM, and the rifle bearing is rated to an MTTF of 160,000 hours.
How does PWM control affect everyday use?
The 4-pin PWM connector means the fan can run at lower speed when the system is cool and ramp up under load, instead of running at a fixed rate. The 650 to 2300 RPM range gives a wide span between near-silent idle operation and full-speed cooling.
Airflow, pressure and noise
- Airflow: up to 40 CFM, plus or minus 10%
- Air pressure: 1.8 mmH2O, plus or minus 10%
- Noise level: 6 to 25 dBA
- Speed: 650 to 2300 RPM, plus or minus 10%
Bearing and rated life
The rifle bearing carries an MTTF rating of 160,000 hours, which describes expected bearing life under rated conditions rather than a guaranteed service period.
Physical specifications
- Model: MFX-B9NN-23NPK-R1
- Dimensions: 92 x 92 x 25 mm
- Rated voltage: 12 V DC
- Rated current: 0.12 A
- Weight: 98 g
Questions & answers
Does this fan need a separate fan controller?
No separate controller is required for basic use: the 4-pin PWM connector plugs into a PWM-capable motherboard header, which then sets the fan speed.
What does the 160,000-hour MTTF figure mean?
MTTF (mean time to failure) is a statistical rating for the rifle bearing under rated conditions. It is a reliability estimate, not a promised lifespan for an individual fan.
Is the 25 dBA figure the noise at full speed?
The rated range is 6 to 25 dBA, spanning lower speed operation up to the 2300 RPM maximum. Actual noise depends on the speed the motherboard commands.
